Survey identifies overheating risk in enclosures

26 May 2015

A Rittal RiAssure3 survey can help identify the likely risk of a system overheating which could lead to equipment tripping or failing.

Running manufacturing automation systems at high temperatures has a negative impact on the system’s performance and will reduce its service life. Not keeping drives at or close to optimum operating temperature can result in system failure.

A typical electrical component’s life expectancy is approximately halved for every 10°C increase in its ambient temperature. Controlling the temperature within enclosures is therefore critical for manufacturers to avoid premature component failure and the interruption to production if the automation system falls over.

The Rittal survey can review any existing cooling solution and determine how suited it is to that particular working environment. It will then provide recommendations around remedial action – for example, changes to the system’s service and maintenance regime to help improve its efficacy or the need to invest in different climate control technology.

A basic checklist for reviewing climate controls in a manufacturing automation system:
• Equipment tripping or failing due to high temperatures which is having an impact on production lines, in that they are either slowing or stopping completely.
• Enclosures which feel hot to the touch.
• Enclosure doors regularly left open or a need for large fans blowing into the panels as the weather improves.
• An inadequate chilling of process fluids which results in production down-time
• Or simply the opportunity of a health check for the cooling 
solution.


Contact Details and Archive...

Print this page | E-mail this page