Coax ETCS connector for rail and harsh industrial applications

23 September 2014

The Han Coax ETCS connector offers a high-performance coaxial connection solution for the provision of a reliable and robust interface for data transmission in railway applications and harsh industrial environments.

The connector was originally developed for use in the European Train Control System (ETCS), in which the signal communication between the rail vehicle and the track bed is controlled by a system known as the ‘Eurobalise’. Since this is a safety-related system, components are required that operate with high reliability over the entire product life.

Special Eurobalise coaxial cables are used on board the trains and in stationary facilities, which in turn have to be equipped with appropriate interfaces at various positions. With the Han Coax ETCS connectors, these positions can now be equipped with a reliable and robust interface.

A key feature of the connector is the crimp flange, which incorporates an additional crimp barrel to secure the screening braid permanently with high mechanical and electrical integrity, while at the same time providing strain relief for the cable.

The connector incorporates a screened coaxial Han-E crimp contact with an impedance of 50 ohms, and is optimised for large conductor diameters up to 12mm.

The Han Coax can be fitted compactly into the established Han 3A and Han 3 HPR housing - making it suitable for robust coaxial data interfaces.

To view the data sheet please click here:

Contact Details and Archive...

Print this page | E-mail this page