Sponsored Article

Nordson EFD micro spray marking system Micromark® for clean working environment

01 May 2014

Prevents skipped shots, reduces maintenance,increases output

MicroMark® Spray Marking Valve Systems produces uniform round patterns and stripes from 5.0mm to 30.4mm (0.20" to1.20") wide without clogging or overspray. The valves can be activated manually, or interfaced with other systems to mark at scheduled intervals or whenever a signal is received.

MicroMark® Spray Marking Valve System is ideal for inks and paints that do not require recirculation. Low-maintenance spray marking valve system produces neat circles and stripes between .2” to 1.2” wide. The combination of adjustable fluid flow, adjustable nozzle air and post-air cutoff provides excellent spray control.

The system includes compact spray valve, ValveMate™controller and tank. The controller is set for length of time and air pressure required for precise coverage. A programmable air delay after each cycle prevents clogging, which greatly reduces maintenance and downtime.

The MicroMark® Recirculating Spray Marking Valve System eliminates the clogging, maintenance and downtime encountered with standard marking systems by using a recirculating pump to keep pigments in suspension and a programmable air delay after each cycle to clean the spray nozzle. The 781RC MicroMark Recirculating Spray Marking System produces uniform round patterns and stripes from 5.0mm to 30.4mm (0.20"to 1.20")wide without clogging or overspray.

Contact Details and Archive...

Print this page | E-mail this page