08 October 2013
The latest addition to the Ha-VIS preLink cabling system enables the extension of transmission paths in data network cabling and also allows fire zones to be bridged and subscriber ports to be directly connected to the terminal block connector without the need for intermediate patching.Even unused cables can be reactivated and extended to the next required connection. The installer needs only to assemble the termination module onto both ends of the cable to be extended. The terminated cable ends are then inserted into the Ha-VIS preLink Extender. A flexible shield clamp transmits the cable shield potential.The extender can be directly mounted on walls, in cable ducts or in a switch cabinet via two 3.2mm diameter fixing holes. Its compact design also allows for installation in cramped spaces.
Print this page | E-mail this page
This isn't a paywall. It's a Freewall. We don't want to get in the way of what you came here for, so this will only take a few seconds.
Register Now