30 April 2013
As well as meeting the latest EN standards, The deTec4 Core meets the latest EN standards. It has no blind zones, which offers optimum positioning and protection against unsafe access while enabling efficient operation.The design of the unit is said to allow safety distances to be minimised to achieve best-possible machine integration as well as higher operator productivity. It offers protective field heights in increments from 300mm to 2100mm and a choice of finger or hand resolution, providing protection against operator intervention in accordance with EN ISO 13855 up to 10m. In addition, it complies with performance level “e” (EN ISO 13849), Type 4 (IEC61496) and SIL 3 (IEC61508).Because the sensor works only in protective mode, configuration and range adjustment is automatic, requiring no additional set-up. Diagnostic codes are said to be simple and additional functions can be set up via safety relays, or the SICK Flexi Classic or Flexi Soft safety controllers.Finally, the sensor is housed in an IP67-rated enclosure and is suitable for use in a operating temperature range from -300C to +550C.
Print this page | E-mail this page
This isn't a paywall. It's a Freewall. We don't want to get in the way of what you came here for, so this will only take a few seconds.
Register Now