This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Sponsored Article

Data acquisition card measures 1 kV signals with great precision

15 March 2013

The latest 1 kV data acquisition card for HBM’s Genesis HighSpeed measurement systems enables very accurate and rapid measurement of voltages from ±20 mV to ±1000 V signals with a measurement accuracy of 0.1%.

Particular attention was paid during development that measurements in categories CAT II 600 VRMS and CAT III 300 VRMS could be implemented that complied with the IEC 61010-1safety standard. This was achieved by focusing on the electrical isolation of the individual input channels and ensures that users can carry very demanding measurement tasks with a high level of safety. 
The 1 kV card offers six input channels that can be recorded in parallel with a sampling rate of up to 2 MS/s. The measurement accuracy is significantly higher than in standard solutions with sensor heads.
Suitable applications include power engineering, power electronics, electric motors and generators.
For more information, go to

Print this page | E-mail this page