26 October 2012
The specifications now include support for FOUNDATION fieldbus H1 (31.25 bit/sec) dual-mode devices employing powerful field diagnostics capabilities, which simplifies the process of developing field instrumentation employing the SIF protocol.FOUNDATION fieldbus, with its industry-proven distributed function blocks and open communications protocol, is a suitable platform for advancing standards-based safety instrumented functions, enabling process end users to reduce both capital and operational costs significantly, and FOUNDATION for SIF are said to have the potential to improve plant and process safety through superior advanced diagnostics at both the device and network level.The FOUNDATION for Safety Instrumented Functions protocol was approved by TÜV Anlagentechnik GmbH to meet the requirements of IEC 61508 up to, and including, Safety Integrity Level (SIL) 3. Process automation end users have clearly stated their desire for FOUNDATION for SIF technology because of its reduced footprint, reduced installed cost, and advanced diagnostics capabilities. Most of the failures related to safety systems do not happen within the logic solver, but can be traced to failures at the field device or control valve. FOUNDATION for SIF provides sophisticated diagnostics for safety devices and a digital path for safety devices. With the dual-mode H1 device capability, instrumentation manufacturers can bring new safety products to market without having to design two different devices. Developers can implement H1 devices with SIF features activated or de-activated. More importantly, plants will only need to stock one type of device that can be used as either a process device or a safety device. When SIF mode is selected, the device will behave as specified by the SIF specifications; otherwise, it will function as a normal H1 instrument. To ensure conformance to safety standards, the two modes cannot run concurrently in the same device.The latest FOUNDATION for SIF specifications release includes a number of updates to the system architecture, application model, protocol, function block and device ITK profile specifications to make this all possible. It also includes a new application note on macro cycle calculation.
Print this page | E-mail this page
This isn't a paywall. It's a Freewall. We don't want to get in the way of what you came here for, so this will only take a few seconds.
Register Now