This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Sponsored Article

Precision Fluid Dispensing Workstation Ultimus V from Nordson EFD enables significant productivity increase in assembly processes.

21 September 2012

  • Eliminates variability by removing operator guesswork from the process.
  • The amount applied is determined by a combination of (1) air pressure, (2) dispense time and (3) tip size. 
  • To make identical dots or fill cavities with consistent volumes of material, the user adjusts air pressure to achieve the desired flow rate and then sets deposit size with the digital timer.
  • For fluids that change viscosity, the Ultimus V high-precision dispenser can store and automatically adjust dispensing settings to keep the amount of fluid applied constant.
  • Can be mounted on robot to automate the process

Main features of the Ultimus V are:

  • Auto Increment mode adjusts dispensing parameters after a certain number of shots or a specific lapsed time? 400 individual memory storage cells
  • Steady, Timed and Teach modes
  • Multi-level operator lockout
  • End of Cycle Feedback loop
  • External PC interface for data input
  • Display cycle counter

Contact Details and Archive...

Print this page | E-mail this page