This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Sponsored Article

Power amplifier for current control of proportional directional, throttle or pressure valves with one or two solenoids

22 August 2012

The new power amplifier PAM-193 is an improvement of the previous power amplifiers of the company W.E.St. Elektronik.

Newest technology fulfils the typical customer requests by an excellent cost/performance ratio. The PAM-193 is suitable for proportional valves with one or two solenoids. The adjustment can be done by potentiometers; internally the power amplifier is designed digitally. Therefore customized adaptations can be made easily.

Short-circuit protection, high signal resolution and a high dynamic can be taken for granted. Detectable faults such as a broken wire are reported via the READY output to the superior controller. The power output is closed loop current controlled and is therefore independent of the power supply and the solenoid-resistance.Features:

For proportional directional, throttle or pressure valves
Up to 1,3 A / 2,6 A (resistant to short-circuits)
Signal resolution: < 0,025 %
Suitable for 12 V and 24 V
A wide variety of input signal ranges
Adjustable PWM frequency or adjustable dither-amplitude; adaptable for all typical proportional valves.

Print this page | E-mail this page