Sponsored Article

JVL has launched a new QuickStep® - integrated stepper motor - with RS485 and CANopen serial interfaces and programmable motion controller

15 December 2010

All the necessary electronics in a stepper system are integrated in the motor itself. JVL has used the newest technology to obtain an incredibly high step resolution of 819200 step/revolution - resulting in smooth and silent running

The motors are available in three sizes: MIS340 with 3.0Nm torque and length of 95mm; MIS341 with 6.1Nm torque and length of 126mm; and MIS342 with 9.0Nm torque and a length of 156mm.

The motor contains everything needed to solve a modern control task as stand-alone or controlled from a PLC or PC. Eight I/O points can be individually configured to digital input, digital output or analogue input. Modbus RTU and CANopen provide easy connections to a PLC or HMI. An ActiveX/OCX driver is available to make interfacing to LabView, Excel, VB or other Windows-programs simple. The MAC motor® standard protocol enables MAC motor®s and QuickStep® motors and SMC75/85 controllers to be connected on the same RS485 bus with up to 254 axes.

The motors can be delivered with wireless Bluetooth, ZigBee or WLAN.

JVL Industri Elektronik :

(0045) 45824440 www.jvl.dk

Print this page | E-mail this page