23 September 2010
Balluff introduce Microsonic’s new hps+ a chemical resistant and pressure rated ultrasonic sensor. Designed with a 1” or 2” threaded socket for direct installation in pressure vessels, this sensor is ideal for level measurement of aggressive media in both pressure (up to 6 bar) and non pressure environments.To prove the chemical resistance and seal tightness, the hps+ ultrasonic sensor was stored over cellulose thinner, an extremely corrosive chemical with a high rate of penetration and subjected to 1,000,000 alternating pressure stresses. Housed in stainless steel the hps+ has a PTFE Teflon membrane and is sealed with an FFKM O-ring to ensure a high degree of resistance against aggressive media. The hps+ ultrasonic sensors are available from Balluff in 4 ranges from 30mm to 8m.For more information about Balluff contact our sales office on 0161 282 4700, email: mailto://sales@balluff.co.uk, web: www.balluff.co.uk
Print this page | E-mail this page
This isn't a paywall. It's a Freewall. We don't want to get in the way of what you came here for, so this will only take a few seconds.
Register Now