N-Tron releases Industrial Wireless Ethernet Radios

07 May 2009

N-Tron has released two Industrial Wireless Ethernet Radios. The 702-W and 702M12-W are both supported by IEEE 802.11n which allows them to utilise three antennas and Multiple In, Multiple Out (MIMO) technology for increased throughput.

702-W
702-W

702-W Industrial Wireless Ethernet Radio
The 702-W supports 802.11a/b/g compatibility for existing wireless networks.

Features
• Full IEEE 802.11a, b, g, and n Compliance
• One 10/100 BaseTX RJ45 Port
• Three Antennas for 3x3 MIMO Operations
• Radio Enable, Link/Activity, and power LEDs
• 802.3af PoE Powered Device
• Extended Environmental Specifications: -40 to 70ºC
• Auto sensing 10/100BaseTX, and MDIX
• Auto negotiates duplex
• 802.11i Compliant WPA/WPA2 Security
• Rugged DIN Rail Enclosure
• Redundant Power Inputs (20-49 VDC)
• Web Browser management
• Four user-definable LED's for display of signal quality

Power over Ethernet (PoE) technology enables the 702-W to receive power through the Cat5e cable from a PoE sourcing device. Web browser management and LED displays, including four user-definable LED’s, are designed to make configuring, maintaining, and assessing the status of the network is as user-friendly as possible.

702M12-W Industrial Wireless Ethernet Radio
The product offers 802.11a, b, g and n support in an IP67 enclosure, which provides protection against dust and the effects of temporary immersion up to 1m for a period of 30 minutes, making the 702M12-W suitable for outdoor, wash down, or extremely dusty environments. The 702M12-W also has a one million hour MTBF and the high shock and vibration specifications.

Features:
• IP67 rated enclosure
• Router and Bridge Network Modes
• Access Point and Station wireless modes, both with optional WDS (Wireless Distribution System) capability
• Extended Environmental Specifications: -40 to 70ºC
• Redundant Power Inputs (20-49 VDC)
• Web Browser management
• 802.11i Compliant WPA/WPA2 Security
• 802.3af PoE Powered Device on data pairs
• Four user-definable LED's for display of signal quality
• Radio Enable, Link/Activity, and Power LEDs
• Auto senses 10/100BaseTX, and MDIX
• Auto negotiates duplex

When in Station or Access Point mode, Wireless Distribution System (WDS) allows the 702M12-W to be connected to a remote wired switch and will allow multiple devices (MAC Address forwarding) to be connected.


Contact Details and Archive...

Related Articles...

Print this page | E-mail this page