Increased flexibility for safety-critical alarm annunciators

17 January 2023

Regulations increasingly require data acquisition and sequence of events capabilities for critical alarm systems and many plant managers are struggling to find a cost-effective way of keeping up. Gary Bradshaw discusses why installing a distributed alarm annunciator system might provide a solution.

In high-consequence risk environments like the nuclear, petrochemical and oil and gas industries, the use of safety, health and environmental (SHE) alarms is a key part of best practice guidelines like the EEMUA 191 standard. One of the key requirements of the EEMUA 191 standard is that critical alarms must be easy to understand, promoting quick and effective operator responses. This is where traditional hardwired alarm annunciators come in as they promote easy of use and rapid responses.

Alarm annunciators are panel-based alarms that are hardwired directly into relevant safety-critical processes, where each window relates to a fixed alarm point from the sensor. If an abnormal event is detected, the relevant window on the panel lights up and the alarm emits a sound, immediately giving operators the necessary information to act. 

It is common to still see alarm annunciators in use that were first installed in the 1980s and 1990s, which are all no longer manufactured or supported and do not meet the current safety requirements. As a result, many sites suffer from obsolescence and support issues and must now upgrade their critical alarm systems.

Updating alarm systems
There are three key considerations for plant managers when updating their alarm annunciators. Firstly, it is crucial that they determine what alarms are classified as SHE alarms and that these are directly hardwired into the processes. This is essential because networked alarms can be susceptible to outages, meaning, if the network goes down, you lose all the alarms on that network. If alarms are individually hardwired, and you lose one wire, you only lose one alarm, and if this alarm is detected from a normally closed alarm contact, then a wire break would still be seen as an alarm on the annunciator window.

The second consideration is the importance of having each of the alarm windows on the annunciator panel permanently dedicated to a specific process, providing pattern recognition and familiarity for operators. This improves operator responsive times, which is an important part of safety standards.

Finally, all alarms should be suitably prioritised using an easy-to-understand system, such as colour coding each window to match the severity of the alarm it represents. This means that allows operators to have a clear order of priority in place for situations where multiple alarms go off, further aiding their chances of responding quickly and effectively.

Gary Bradshaw is director at Omniflex.


Contact Details and Archive...

Print this page | E-mail this page