DIN wireless gateway supports network connectivity for sensors

06 October 2019

The DIN Gateway V2 is a 900 mHz wireless gateway, from SignalFire Wireless Telemetry, with an integrated I/O capability for easy network connectivity of wireless and wired sensors, integrated Ethernet and built-in automation.

Featuring two digital inputs, two digital outputs, three analogue inputs and an optional gateway output module with eight analog and two digital outputs. The three analogue inputs can be used for any measurement or control device while the digital outputs are useable for annunciation or basic on/off applications. 

This enhanced gateway – designed for Class 1 Division 2 Groups C and D locations – supports wireless configuration up to 240 remote nodes at 3+ mile typical range and interfaces via RS-232 Modbus RTU or Modbus-TCP (Ethernet). This gateway enables wireless configuration of remote nodes and HART devices via PACTware or Radar Master and automatically configures as a star or mesh network.

The compact DIN mount gateway features low power consumption, integrated high-gain 5dB omnidirectional antenna and 500 mW radio operating at 902-928 MHz license-free ISM band. The optional expansion output module provides an additional 8 analog outputs and 2 digital outputs. The DIN Gateway V2 is now available for immediate shipment.


Contact Details and Archive...

Related Articles...

Print this page | E-mail this page