Cork inspection vision solution

19 August 2019

The Cork Inspector is a new addition to the Eye Vision Technology (EVT) emSens Beverage Inspection series. It can inspect corks in bottles, to ensure they are in the correct position, or stick out too much (convex) or are seated too deep in the bottle neck (concave).

The compact system includes interfaces which allow the user to connect several high-speed and high-resolution cameras. Additionally, the Cork Inspector has an integrated illumination control for several channels for LED illuminations.

Communication, with a tracker system as well as with a PLC or SCADA system, can be carried out via different hardware interfaces such as RS232, RS485, GigE Ethernet or USB connections.
With the configurable tracker protocol different tracker boards and systems can be integrated into the software and the inspection process, no matter which interface. 

The Cork Inspector can be also integrated into complex bottling plants.Process integration and communication can be carried out via standard software interfaces, for example OPC UA, Profinet, Modbus or also standard Ethernet UDP and TCP/IP and the results, with images, can be displayed at the control station

The Cork Inspector includes pre-configured bottle types and can be adjusted to new types. Adjustment can be carried out either by configuring existing bottle types or new parameters can be set up.

Contact Details and Archive...

Related Articles...

Print this page | E-mail this page