Sponsored Article

Compact DC motor drives for any application!

07 August 2018

The EM-241 drive has been designed for the control of low voltage (12-48Vdc) brushed DC motors or actuators where fine control is required.

In a compact 42x72x25mm package, it can provide up to 15A of continuous current. DIN rail kits are available for mounting inside a control panel.

With up to 20 settable parameters via the EM-236 plug in module or EM268 USB connection with Ementool PC software making it a cost effective solution for many applications.

Control is given through PNP or NPN switching with 0-5V analogue control for speed setting. The SPF (digital) and SAF (analogue) can be used for positioning applications when a digital hall sensor, encoder or an analogue potentiometer are used for reference and feedback.

Standard functions include:

• Four quadrant – speed, direction, acceleration and brake control
• Adjustable current limit – for motor protection against overload and over torque
• Fault output & on board LED – to identify fault conditions
• Auto-reverse – for anti-trap upon over current detection
• End of travel detection – end limit switch inputs or settable pulse counts (PLI version)


Contact Details and Archive...

Print this page | E-mail this page