01 November 2007
The machine module automated with the D410 motion controller thus receives the guide value from a higherlevel controller and synchronizes its axis to this guide value. The machine modules can be fully tested individually and added or removed during live operation, if required. As many asn four fast cam outputs or three probes can be implemented on the onboard inputs/outputs. The drive controller supports both servo control for high dynamics and vector control for maximum torque accuracy.
Print this page | E-mail this page
This isn't a paywall. It's a Freewall. We don't want to get in the way of what you came here for, so this will only take a few seconds.
Register Now