This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Improved system diagnostics for industrial PCs

24 October 2016

Industrial PCs from B&R have always offered system diagnostics but it has gone one step further to offer support whenever service is required. 

All informational and diagnostics features will now be provided via the newly developed HMI Service Center, a software tool used to test B&R's industrial PCs and automation panels which aims to offer maximum system transparency for users.

This solution makes it possible to read statistical data like power-on cycles and temperature sensor values as well as information such as serial numbers and part numbers. This data is managed by the Maintenance Controller.

Howe does it work – start the automation PC or panel PC with a USB flash drive inserted. The system boots from the embedded operating system found on the flash drive and a user interface appears which provides access to all the necessary information and additional diagnostics features.

Contact Details and Archive...

Print this page | E-mail this page