01 October 2007
Ifm electronic, which has its UK base in Hampton, said the use of two different sensor elements, which monitor each other, ensure that a developing sensor drift is detected and diagnosed.The sensor has also been designed so that if one element fails the process will continue with the other.Via the diagnostic output of the sensor, possible error states are directly transmitted to the higher-level of controller. A failure warning and switch-off threshold can be defined via the software.
Print this page | E-mail this page
This isn't a paywall. It's a Freewall. We don't want to get in the way of what you came here for, so this will only take a few seconds.
Register Now