This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

FreeRTOS programmable remote I/O module

03 March 2015

Artila Electronics, a designer and manufacturer of embedded device networking and computing, has introduced RIO-2010PG, the new FreeRTOS programmable remote I/O module. FreeRTOS is a cross-platform real-time operating system.

RIO-2010PG is powered by a 32-bit NXP LPC1768 100MHz ARM Cortex M3 processor which is equipped with 64KB SRAM 512KB Flash and FreeRTOS operating system. The industrial I/O of RIO-2010PG features one 10/100 MHz Ethernet port, one full modem RS-232, one isolated RS-485, eight channels of relay, 16 photo-isolated digital inputs and one 1-wire interface for temperature or humidity sensors. 

RIO-2010PG is supplied with a FreeRTOS+lwIP board support package (BSP), device manager utility and example programs. Users can choose the ToolChain either from Mentor’s Sourcery CodeBench Lite ARM EABI Release or Keil by ARM. A tiny web server is available in RIO-2010PG and it is ready for customer’s web-based application. 

Example programs that demonstrate serial and Ethernet data communication, Web configuration and EEPROM read and write are available in the RIO-2010PG application development kit. The device manager utility features device discovery, network configuration, user web page and firmware upload is also included.


Contact Details and Archive...

Most Viewed Articles...

Print this page | E-mail this page