This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Multi-function laser micrometer with Ethernet interface

08 July 2014

Micro-Epsilon has introduced a compact, self-contained optical laser micrometer with Ethernet interface. 

As well as having an extremely compact design, the optoCONTROL 2520 system also offers high accuracy and a maximum transmitter to receiver gap of 2m, which incredibly, unlike any other micrometer currently on the market, which allows the target to be positioned at any point in the gap.

The optoCONTROL 2520 is a non-contact laser-based measurement system that uses an integral, high resolution CCD camera for dimensional measurements. The system offers a high sampling rate (2.5kHz), combined with repeatability of < 5µm, linearity of 0.02mm and resolutions of < 1µm. The system offers a maximum measurement width of 46mm.

A web browser interface allows users to view and record measurement values, configuration of sensor parameters and enables visualisation of the sensor video signal. No software needs to be downloaded by the user to a PC or laptop – the micrometer’s integrated software allows the user to set up and record measurements via the web browser.
 
A real-time measurement chart offers a variety of measurement values such as single edges, diameter and centre line which can be displayed or hidden in the chart at the user’s discretion. In addition, the system provides various averaging and filter methods, as well as statistical process control features. Ethernet, EtherCAT and RS422 interfaces are available directly from the sensor. For analogue outputs, a small DIN rail module is supplied.
 
OptoCONTROL sensors measure the dimensions, edges or gaps on a target using the ThruBeam ‘shadow’ principle. The transmitter produces a parallel light curtain that is transmitted via a lens arrangement into the receiving unit. The beam is interrupted if there is an object in the light path. The CCD camera in the receiver unit measures the ‘target’ contour formed by the shadow and outputs this as a geometrical value. The target object can be in any position within the light curtain. The smallest detectable diameter of the target object is approximately 0.5mm. 

The sensor is also suitable for detecting large objects, performing large distance measurements, counting tasks and roundness measurement. Up to eight segments of the target can be measured and output simultaneously.

 The optoCONTROL 2520 is protected to IP64 and can operate in ambient temperatures from 0°C to +50°C. 


Contact Details and Archive...

Most Viewed Articles...

Print this page | E-mail this page