This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Safety relay monitors light beam devices

20 May 2014

The safety relay PNOZ c2 is designed for use for safe monitoring of light beam devices up to Type 4 or sensors with OSSD outputs in accordance with EN 61496.

The relay offers a fast reaction time of 12 ms, which can allow for a reduction in safe distances from a hazardous movement. Depending on the application environment, it may not be necessary to protect against reaching behind the system. There is no need to look up technical details for annual ESPE inspections, because all the relevant information needed can be read directly from the device. 

The PNOZ c2 offers the very highest safety standards up to PL e of EN ISO 13849-1 / SIL CL 3 of IEC 62061 for monitoring type 4 light beam devices and sensors with OSSD outputs.

Related Articles...

Print this page | E-mail this page