Fast-acting failsafe actuator
25 March 2014
A recent example of customised valve actuators from Rotork-Hiller, was the result of a requirement to build a fast-acting failsafe stop valve actuator for a plant firefighting system that demanded an exceptionally innovative design solution.
The specification called for a compact pneumatically operated actuator, with no springs for the failsafe function, necessitating the provision of a stored energy accumulator.The addition of a conventional accumulator would have exceeded the dimensional constraints of the specification, so Rotork-Hiller engineers created a new design to incorporate the accumulator within the pneumatic actuator. This not only eliminated the size problem but also freed-up additional space for mounting the controls to the actuator.
These controls include filters, regulators, solenoid valves and pressure switches,contained within overall actuator dimensions of 470 x 584 x 680 mm.
The controls reduce the supply pressure of 45 Barg to 31 Barg, which is pumped into the accumulator to provide approximately 4.4 litres of storage capacity. The actuator delivers a maximum thrust of 27,617 N.
When asked about the challenges presented by this project, Rotork-Hiller’s engineering manager said: “Our biggest challenge was the ability to meet the customer’s expectations with a unique actuator design, built to stringent specifications and regulatory requirements and supplied within an expedited schedule. With the innovation applied to the design, our lead engineer on the project has confirmed that all expectations have been met or exceeded.
“One of the best features of this design is the pneumatic system redundancy with the ability to support the failsafe function of the valve in a simplified stand-alone package. The integration of the nitrogen storage accumulator within the actuator body itself can be further developed and potentially applied to all existing Rotork-Hiller failsafe pneumatic designs.”
Contact Details and Archive...
Most Viewed Articles...