This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Communication processor for telecontrol applications

11 September 2013

The Siemens Industry Automation Division has developed a new communication processor for telecontrol applications, based on its Simatic S7-1200 controllers.


Simatic CP 1243-1 DNP3 from the TeleControl Professional product range connects the controller to a control center, such as a process control system, via DNP3 (Distributed Network Protocol). A typical use could be for the transfer of measured values in widely spread outdoor areas to a central station, for example in sewage and water treatment plants, district heating networks and pump stations, as well as in oil and gas supply, energy distribution and transportation systems.

Simatic CP 1243-1 DNP3 transfers measured values, setpoint values and alarms to the control station cyclically or event-based. In the STEP 7 engineering tool, the user simply selects the data to be transferred from the Simatic S7-1200 CPU and specifies the required communication parameters.

Communication with the control center is based on the established telecontrol protocol according to DNP3 specification 2 (2007/2009) including security mechanisms for secure data transfer via wide area networks. In addition to data transfer, the communication processor also has an e-mail function, for example to inform maintenance staff automatically about previously defined events, such as threshold values being exceeded.

Simatic CP 1243-1 DNP3 can buffer up to 64,000 values with time stamp in order to prevent data loss when a connection fails. When the connection is re-established, the buffered values are automatically transferred to the control center in the right chronological order. Diagnostic options, locally via LEDs or in the STEP 7 engineering tool, offer the user allow for analysis of the station status. The communication processor is connected to the local communication network in the outdoor area via Ethernet interface. Appropriate transmission components, such as the Scalance M874 industrial router, are available for remote communication from the local network to the control station.


Contact Details and Archive...

Most Viewed Articles...

Print this page | E-mail this page