This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Sponsored Article

Allied Motion introduces small brushless dual-shaft motor

21 May 2013

The new KinetiMax 32EB-DS brushless DC motor, with identical output shafts, is ideal for handling high side loads on both sides of the motor.

Within the family of brushless DC motors, a new family member has been introduced. Besides the existing KinetiMax 32EB, Allied Motion has introduced the KinetiMax 32EB-DS, an extremely compact brushless DC motor with a dual output shaft. This KinetiMax is an outer rotor motor and has two identical shafts and two identical bearings capable of handling high side loads on both sides of the motor.

The compact 32 mm KinetiMax has a continuous output torque of 32 mNm and a 16 W output at a constant speed of 4750 RPM. The high quality components ensure a minimum operating life of 20.000 hours. The integrated drive electronics have a speed set input to adjust the motor speed from 250 to 6000 RPM and comply with relevant EMC standards. Standard protection features include IP54 level protection sealing, thermal overload protection with automatic recovery, and reverse supply voltage protection.

Applications
Two electrical versions are available. The two-wire version is as simple to control as a DC motor, needing only a DC voltage to operate. The four-wire version is equipped with speed set input (0-5 Volt or PWM) and a tacho output (18 pulses per revolution) for speed monitoring. Apart from the standard editions, Allied Motion also offers customer specific solutions for the KinetiMax 32 EB DS. Therefore, the motor is ideal for small dual head membrane pumps , peristaltic pumps, blower-fans and medical or industrial applications, in which a long operating life is required.

Specifications
Brushless DC motor with integral drive - Protection: IP54 - Protection sealing - Supply voltage: 24 Volt - Thermal overload protection - Nominal torque: 32 mNm - Reverse supply voltage protection - Nominal speed: 4750 RPM - EMC compliance with EN55014- 1/2 en 61000-6-1/3 - Output: 16 Watt - Adjustable speed range: 250 to 6000 RPM - Diameter: 32 mm.

www.alliedmotion.com


Most Viewed Articles...

Print this page | E-mail this page