This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

In-line sampling system for moisture measurements in closed processes

30 April 2013

An improved PowderVision sampling system, from NDC Infrared Engineering, allows moisture to be measured in powders, granules and flakes flowing in enclosed ducts or gravity fed conveying systems.

The sampling solution can be used with a wide range of industrial powders, including chemicals, minerals, detergents and ceramics.

Designed to work with an NDC 710e NIR moisture or multi-component gauge, it collects samples every few seconds, with measurement values output via digital or analogue connectivity to a PLC or SCADA system for process control.

PowderVision consists of a tube-mounted sampling cup made from 316 stainless steel which slides into a collar that is permanently welded into the appropriate duct in the process. PowderVision is optically coupled to the 710e NIR gauge via a sapphire window. The cup collects sample as it flows through the duct, allowing moisture and other measurements to be made simultaneously. When the measurement is complete, the cup is emptied and the next sampling sequence begins.

Making continual on-line moisture measurements eliminates the need to send samples away for laboratory measurement and allows drying processes to be controlled automatically, helping users to achieve consistent product quality, as well as creating opportunity for increased product yield and reduced fossil fuel consumption through process optimisation


Contact Details and Archive...

Related Articles...

Most Viewed Articles...

Print this page | E-mail this page