Power amplifier for current control of proportional directional, throttle or pressure valves with one or two solenoids
22 August 2012
The new power amplifier PAM-193 is an improvement of the previous power amplifiers of the company W.E.St. Elektronik.
Newest technology fulfils the typical customer requests by an excellent cost/performance ratio. The PAM-193 is suitable for proportional valves with one or two solenoids. The adjustment can be done by potentiometers; internally the power amplifier is designed digitally. Therefore customized adaptations can be made easily.
Short-circuit protection, high signal resolution and a high dynamic can be taken for granted. Detectable faults such as a broken wire are reported via the READY output to the superior controller. The power output is closed loop current controlled and is therefore independent of the power supply and the solenoid-resistance.Features:
For proportional directional, throttle or pressure valves
Up to 1,3 A / 2,6 A (resistant to short-circuits)
Signal resolution: < 0,025 %
Suitable for 12 V and 24 V
A wide variety of input signal ranges
Adjustable PWM frequency or adjustable dither-amplitude; adaptable for all typical proportional valves.
Most Viewed Articles...