This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Sponsored Article

Mass flow meter for air and gases

10 August 2012

Manufactured by E+E Elektronik GmbH, Austria.

The EE776 flow meter is based on the thermal mass flow measurement and is ideal for measuring the flow of compressed air and gases in pipes from DN50 to DN300. The use of compressed air, nitrogen, CO2 or other non-corrosive and non-flammable gases can be measured up to a pressure of 16 bar. Other models are available for measurement up to 40 bar.

The EE776 flow meter sets new standards in terms of safety and easy assembly. The patented non-return protection combines three functions in one device:

  • Non-return protection.
  • Seal.
  • Precise positioning.
  • Immersion depth and orientation are easy to control, guaranteeing accurate measurement results.
    An encapsulated O-ring prevents escape of compressed gas during assembly.
    The probe can only be pushed in one direction during installation, and cannot return , even if released.

Measurement accuracy is +/-2.5%, and available outputs include analogue ( current or voltage ), switching, or pulse output for measuring consumption.

Omni Sensors and Transmitters Ltd.

www.sensorsandtransmitters.com Tel; 01926 614263


Contact Details and Archive...

Most Viewed Articles...

Print this page | E-mail this page