Fluke Thermal Imager offers
01 June 2012
Until 30th June 2012, Fluke is offering a free telephoto or wide-angle lens valued at £1125 to purchasers of a Fluke Ti27, TiR27, Ti29, TiR29, Ti32 or TiR32 Thermal Imager, plus a £400 cash-backto purchasers of a Fluke Ti32/TiR32.
These Fluke P3 Series models are high-performance thermal imagers, specifically designed to work in the harshest environments and provide superior image quality with one-handed, easy-to-use operation.
The field-installable, telephoto and wide-angle lenses bring distant and wide views into sharp focus. The Fluke Ti27, Ti29 and Ti32 are for industrial, electrical and process control applications, while the Fluke TiR27, TiR29 and TiR32 are for building inspection, energy audit and building maintenance applications. After purchase of the Fluke camera (during the promotion period) the customer simply goes to www.fluke.co.uk, clicks on the promotion banner, chooses the lens and forwards a scanned proof-of-purchase, the distributor invoice. Fluke then sends the lens, and if a Ti32/TiR32 is purchased, transfers the “cash-back” sum direct to the customer on receipt of details. Full terms and conditions are on the Fluke web site promotion page.
The Fluke Ti27 and TiR27 have 240 x 180 sensors, the Fluke Ti29 and TiR29 have 280 x 210 sensors, while the Fluke Ti32 and TiR32 have 320 x 240 sensors, all providing industry-leading spatial resolution delivering sharp and detailed images on a 3.7" high-definition 640 x 480 display. The Fluke P3 Series Thermal Imagers have a three-button menu designed for intuitive operation and navigation with a push of the thumb, and provide either manual focus or a smart focus system. They all offer industry-leading thermal sensitivity and feature transmission correction and a high temperature alarm (dew point temperature alarm on the TiR models). All models feature Fluke’s patented IR-Fusion® technology, enabling users to marry high-precision thermal images with visible light images in full screen, picture-in-picture or blended views, for enhanced problem detection and analysis. IR-Fusion is the only solution available with physical parallax correction, which enables perfect alignment, pixel by pixel, of both infrared and visible images.
Fluke SmartView® Software (with free software upgrades for the life of the product) is included with each thermal imager. SmartView software is a modular suite of tools for viewing, annotating, editing and analysing infrared images that fully supports Fluke IR Fusion technology. It enables users to edit images in five viewing modes and generate customised professional reports in a few steps.
The Fluke Ti27, Ti29 and Ti32 Thermal Imagers are designed and priced to deliver unprecedented performance for maintenance professionals, troubleshooting technicians, industrial, commercial and HVAC/R technicians, the TiR27, TiR29 and TiR32 for facilities managers, energy auditors and restoration and remediation professionals.
The rugged Fluke P3 Series Thermal Imagers are tested to withstand a drop of 2 metres with the standard lens, offer thermal sensitivity of =0.05°C at 30°C target temperature (=0.045°C at 30°C for TiR models) and a temperature measurement range of -20°C to +600°C for the Ti27, Ti29 and Ti32, -20°C to +150°C for the TiR27, TiR29 and TiR32.
All Fluke P3 Series include a 2GB SD memory card to enable download of images to a computer. Each unit comes with two field-swappable, rechargeable lithium-ion smart battery packs, a two-bay external charger, a rugged hard carry case and a soft transport bag, an adjustable hand strap for right- or left-handed use, and an AC power supply.
More information about all Fluke products can be obtained via the Fluke web site at www.fluke.co.uk.
Contact Details and Archive...
Most Viewed Articles...