This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Sponsored Article


12 March 2012

Status Instruments has launched SEM1636, a new ‘Smart’ (4 to 20) mA loop powered switching / alarm unit.

Designed to monitor a (4 to 20) mA loop, the SEM 1636 provides two independent change over trip contacts set to trip at any point within the (4 to 20) mA range.

The SEM1636 requires no additional power connection as power is derived from the (4 to 20) mA loop. Trip outputs are independently configured for action and set point as well as dead band. Six actions are provided: normal High/Low/Deviation and inverted High/Low/Deviation. Additional filter and user linearisation functions are also provided.

Easy to use, the SEM 1636 is fitted with a USB interface for quick and easy configuration. Users just need to connect a standard USB cable between the SEM1636 and their PC using Status Instruments’ free configuration software; the PC will automatically upload the existing configuration data and guide the user through any changes they wish to make.

To save further time, the SEM1636 does not need to be wired to a power supply during the configuration process since it is powered via the USB interface from the PC.

For more information contact Status on tel: 01684 296818;

Print this page | E-mail this page