This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Sponsored Article

Series 100, 200 & 300 Pressure transmitters

14 December 2010

These Tamo – Pinter pressure transmitters are designed for the pressure measurement of liquid and gaseous media. The 100 series is a general purpose unit whilst the 200 series can be used with crystallising and viscous fluids and the 300 series for hygienic applications or with corrosive media’s in petro-chemical or similar applications.

They use ceramic sensors which have a life of over one million cycles and are available in both in vacuum ranges and pressure ranges up to 600 bar gauge pressure, and 40 bar absolute pressure.

The output signal can be 4 – 20 mA, 0 – 10 V or other options and the accuracy is less than 0.5 % full scale. Special versions are possible to give less than 0.25% or 0.1% accuracies.

The units are available in ¼" to ¾" threaded connections as well as tri-clamp and other hygienic types and flanged connections.

The housings are 1.4301 stainless steel with the design being able to with stand -20 to +125 degree C media temperatures and -40 to +85degree C ambient temperatures with specials for higher temperatures available upon request.

The standard electrical connection is via a plug which gives the transmitters an IP65 rating.

For further details please contact Tamo Ltd on 01895 200015 or at sales@tamo.co.uk. 

http://www.tamo.co.uk


Most Viewed Articles...

Print this page | E-mail this page