This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Sponsored Article

Low Power Loss Lighting Controller from Stemmer

12 January 2010

The new RT Series of lighting controllers from Gardasoft use 'SafePower' - a new technology that adjusts the output voltage to the lighting system separately from the input voltage.

A key advantage of this technology is the ability to use an existing or standard power supply without needing to take special consideration of the voltage requirements of the LED and controller combination. Allowing the use of a master PSU 24V equipment in a cabinet reducing deployment and upfront costs and dramatically. This technology also provides a reduction of power dissipated within the controller and subsequently any heat generated allowing easier and simpler cabinet design. This technology is in addition to the excellent illumination/automation control provided by the Gardasoft range.

The first products to be based on SafePower technology are the 2 channel, 20A, RT200-20 (with an LCD display) and the RT220-20 (with an Ethernet interface and no LCD display). Variants that offer exposure time of less than 20 Microseconds, the RT200F-20 (with an LCD display) and the RT220F-20 (with an Ethernet interface and no LCD display) are also available. 

The RT260-20 (with an RS232 interface and no LCD display) and the RT260F-20 for exposure times of less than 20 Microseconds are also available as upgrades to LFC612 and LFC612F models. These two 2-channel models also operate at up to 20A.


Contact Details and Archive...

Most Viewed Articles...

Print this page | E-mail this page