This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Severn Trent turns to Mono for Mutrator replacement

11 August 2009

Severn Trent Water in the UK has replaced 30 year old Mutrators with two Mono products at its Burnhill Green sewage treatment works. The privately owned water company wanted to boost efficiency and cut costs with the new Mutrators.

A typical installation of a Mono Mutrator packaged pumping system
A typical installation of a Mono Mutrator packaged pumping system


Mono Mutrators are packaged pumping systems that combine a macerator and progressing cavity pump to macerate any solids within a flow and protect the pump from blockages. The new equipment has been installed for the transfer of raw sewage at a capacity of 13m3/h to a high level Rotating Biological Contactor (RBC).

Neil Horton, project engineer for Adroit Construction Services, the framework contractor on the project, commented: ‘We were very happy with the performance of the existing units at Burnhill Green and therefore wanted a ‘like for like’ replacement.

‘The new Mono Mutrators are not only saving us energy but also reducing our maintenance costs.’

By combining a Mono progressing cavity pump, together with a tri-hammer macerator fitted in the suction line, the Mono Mutrator is able to lift the raw sewage from the collection sump into the cutting chamber to finely macerate any solids prior to entry into the pump. Blockages are therefore eliminated and when the pumping cycle ends, large unmacerated solids fall back into the sump, clearing the suction pipe for the next duty run.

The Mono Mutrator is available in various design options to suit different wastewater handling applications and can be installed either vertically or horizontally. It has a number of drive options for optimum pump speed and reduced power consumption, and is also able to pump long distances and high heads.

The positive displacement action of the Mono pump offers the benefits of smooth and controlled transfer of the sewage through small bore pipes into the main sewage system for further treatment. Being a positive displacement pump, head is independent of speed. This, combined with correct pump selection, leads to low wear rates, minimal spares usage, lower running costs and less downtime, minimising least whole life costs. On many high head pumping duties, Mono claims its Mutrators can consume less than 50 per cent of the energy of conventional sewage pumps.


Contact Details and Archive...

Related Articles...

Most Viewed Articles...

Print this page | E-mail this page