New Fluke milliamp clamp meters
30 June 2009
Fluke has introduced two new milliamp clamp meters designed to help technicians test critical automation and control circuits without breaking the circuit or interrupting operations.
The meters are said to offer significant savings in time and money. The new Fluke 772 and 773 Milliamp Clamp Meters join the Fluke 771 to deliver a comprehensive range of cost effective test and measurement capabilities.
These precision tools are designed for instrumentation technicians, contractors and process & control installers who carry out milliamp loop troubleshooting on process control circuits, instruments and automotive systems. Further information is available at www.fluke.co.uk/77x
Unique to Fluke, the 771, 772 and 773 Milliamp Clamp Meters are engineered to accurately measure the minute amounts of current (4mA to 20mA signals) that flow through control system circuits, without having to shut down the system, break the circuit and insert a test instrument. Instead, sensitive current clamps placed around the wire detect and measure the current flowing through. In addition, the Fluke 772 and 773 can be used to simultaneously source, simulate and measure milliamp signals in a broken circuit, negating the need for additional tools. The Fluke 773 will also source and measure DC voltages for troubleshooting voltage input and output devices; will power a transmitter for independent checking of its mA output signal; and will provide a scaled output signal to provide datalogging by a Fluke 280 Series Digital Multimeter, for example.
Without breaking the loop, the backlit display will give simultaneous milliamp and percentage span readings, with milliamp resolution to 0.01mA. The Fluke 771/772/773 feature a detachable clamp that can be used docked, or detached via its extension cable to facilitate measurement in tight spaces, and a Hold function to capture and display changing measurements for convenient viewing. A built-in flashlight illuminates wires in dark enclosures, and a battery saving feature cuts in automatically after prolonged inactivity. Users can also measure 10-50mA signals in older control systems using a 99.9mA range.
The Fluke 771/772/773 Milliamp Clamp Meters are supplied with a soft carrying case and can be purchased from Fluke authorised distributors. More information about all Fluke products can be obtained via the Fluke web site at www.fluke.co.uk.
Contact Details and Archive...
Most Viewed Articles...