This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Mass flow meters and controllers for gases

18 September 2018

The Mass Stream range of instruments from Bronkhorst operate on the basis of direct through-flow measurement in accordance with the constant temperature anemometer principle. They contain no moving parts and the measured gases pass the two stainless steel sensor probes directly, without bypass.

As a result, the gases are unhindered on their flow path. This is said to make the series particularly suitable for applications with low pressure loss as well as less sensitive to moisture and particulate contamination than thermal mass flow instruments with a bypass sensor. 

The electronics casing has a robust design with an IP65 level of protection (dustproof and splash waterproof). The mass flow meters and controllers can be supplied with an optional integrated multifunctional display. On the new D-6390 model, the maximum measuring range has been expanded to 10,000 ln/min air equivalent. Analogue I/O signals as well as an RS232 interface are provided by default. In addition, an interface with DeviceNet, PROFIBUS DP, Modbus or FLOW-BUS protocols can be integrated.

Typical applications are said to include gas consumption measurements, aeration and purging processes or natural gas/biogas applications.


Contact Details and Archive...

Print this page | E-mail this page