This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Smart actuator optimises control valve performance

28 January 2018

Badger Meter has launched its next generation Smart Electric Valve Actuator (SEVA).

Available through Pump Engineering, the actuator incorporates military grade components to withstand extreme conditions, while the microprocessor controlled linear stepper motor is said to provide exceptional positional accuracy to ensure reliability, accuracy and repeatability.

Two models are available with 100ft-lb (135Nm) and 200ft-lb (270Nm) thrust options suitable for 1/4in – 2in Badger Research Control valves. The actuators utilise the Industrial Ethernet Protocol (EtherNet/IP) and are certified by the ODVA. SEVA actuators feature a dual-port Industrial Ethernet card and can be set-up via the built-in firmware or via a USB port.  For applications which require a higher level of information for their control systems, the actuators allow for both linear and Device Level Ring (DLR) network topologies. 

The actuators are designed for extreme conditions and provide accuracy of (±1% of full scale) with five available positions when there is a loss of power; continue operation, fully closed, fully open, hold position, or target value. They also feature four positions when there is a loss of signal; fully closed, fully open, hold position, or target value. Both the full closed and full open positions are defined during set-up.

In addition, for precise applications, the SEVA offers a loop-powered feedback signal which actively communicates stroke position to the control system; it also features a manual override capability to help operators when there is a loss of power. 

The actuator assembly provides the option to include two user-adjustable limit switch outputs, while an external signal is provided once the set points of the limit switch are met. Furthermore, it can split the incoming 4-20 mA signal and use either the lower or higher range of the signal for full stroke operation.

The range is available with FM or ATEX EExd IIB T6 approvals for hazardous areas and are IP66 rated.


Contact Details and Archive...

Most Viewed Articles...

Print this page | E-mail this page