This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Cable falsely claims BASEC approval

27 June 2016

The Approved Cables Initiative (ACI) has been alerted to a batch of low smoke flex, found with a `BASEC approved’ sticker on its packaging that is not BASEC approved.

The cable in questions comes from an overseas manufacturer and is believed to have been supplied via one UK distributor.

BASEC (British Approvals Service for Cables) has advised ACI that the manufacturer has taken action to prevent recurrence and has contacted its customer. However, the distributor took delivery of the cable several months ago and it is believed that all affected cable has been sold and may well have been installed. The cable was subject to a current HAR approval but not a BASEC approval.

ACI and BASEC are advising distributors and installers/contractors to check incoming product to make sure it is correctly and accurately marked, labelled and supplied against their orders. If they have ordered approved product they should obtain copies of the relevant approvals for their records along with the appropriate CE marking information e.g. EC Declaration of Conformity.

The ACI is reminding contractors, when purchasing cable, to be vigilant and to look for third-party approval. In this instance, the BASEC mark would have been stamped on the cable itself if it were a BASEC approved cable. Additionally the BASEC logo/label on packaging and drums should have a licence number of the manufacturer that can be verified via BASEC’s website.

ACI recommends contractors should:
• Look for BS or other relevant standard number
• Ensure it has a cable reference number or UK cable code
• Check number of cores and nominal cross sectional area
• Detail your order with quantity and lengths of cable required
• Note the manufacturer’s details for every drum
• Confirm traceability in your purchase
• Only purchase third party approved cable and check for the correct cable mark
• Add specific technical requirements to your order
• Include delivery details


Contact Details and Archive...

Most Viewed Articles...

Print this page | E-mail this page