This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Low volume ultrasonic flow meter

29 March 2016

Titan Enterprises has introduced the Process Atrato, a low volume, high performance ultrasonic flow meter which is designed to address the challenges of the process and control environment.

The compact Process Atrato flow meter includes features of the  Atrato ultrasonic technology (high linearity, high sensitivity, wide flow range linearity, no moving parts, fast response time, can be installed anywhere) with the addition of a more durable construction. Built from 316 stainless steel and PEEK the Process Atrato is supplied sealed to the IP65 standard.  

Rated for use up to 65°C and 20 Bar the Process Atrato is available in four models operating over flow ranges from 2 ml/min to 15 litres per minute, accuracy is ±1% over the whole flow range. 

Each Process Atrato is calibrated with a pre-set 'K' factor so all meters of the same flow range are fully interchangeable.

As standard the Process Atrato comes with two frequency outputs (PNP and NPN).  Two multicolour LEDs indicate signal strength, power malfunctions and pulse outputs.   Electrical connections are through a standard M12 four pin, sensor connector and an advanced signal processing system is said to allow flow measurement across the whole Reynolds number range allowing both viscous and non-viscous products to be metered anywhere.


Contact Details and Archive...

Related Articles...

Most Viewed Articles...

Print this page | E-mail this page