This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Moore Industries Introduces the STA Safety Trip Alarm

14 July 2009

In response to the rapidly growing demand for interface instruments for plant-critical IEC 61508 Functional Process Safety applications, Moore Industries has introduced the STA Safety Trip Alarm.

Part of the company’s FS FUNCTIONAL SAFETY SERIES, the STA is certified to IEC 61508: Parts 1, 2 and 3 by TÜV Rheinland for single use in Safety Instrumented Systems up to SIL 2. The STA firmware is suitable for a SIL 3 system, which allows the STA to be used in a redundant architecture (1oo2, 2oo3, etc.) up to SIL 3.

The STA Safety Trip Alarm performs as a logic solver and acts on potentially hazardous process conditions; warns of unwanted process conditions; provides emergency shutdown; or provides on/off control in Safety Instrumented Systems (SIS) and traditional alarm trip applications.

The 4-wire (line/mains-powered) STA accepts a signal input from transmitters (current and voltage inputs), temperature sensors (RTD and thermocouple inputs), resistance and potentiometer devices, and a wide range of other monitoring and control equipment.

The STA provides three failsafe alarm outputs. Two are configurable process alarms that trip when a monitored process variable falls outside of user-set high and/or low limits. The third alarm is a non-programmable, latching alarm that is activated if any internal faults are found by the STA’s extensive internal diagnostics. This fault relay is also triggered if the input is faulty or broken.

The STA is provided with comprehensive FMEDA (Failure Modes, Effects and Diagnostics Analysis) certified safety data to be used by a competent functional safety practitioner to determine the unit’s applicability as a logic solver in specific safety-related applications.

The STA features industry-best 20-bit input resolution; long term stability of up to 5 years between scheduled calibrations; a rugged, industrial metal housing; and isolation and RFI/EMI protection that provides superior protection against the effects of ground loops, plant noise, and radio frequency and electromagnetic interference. The unit also features standard “transmitter excitation” to provide 24V power to a 2-wire transmitter. The STA Safety Trip Alarm can be ordered with an analog output option (not part of the safety path) to provide a combination alarm trip and transmitter in one compact unit.


Contact Details and Archive...

Related Articles...

Most Viewed Articles...

Print this page | E-mail this page